Cool Soak ™ Stain & Rust Remover is specially formulated to remove rust, water spots and detergent residue from stainless steel and tungsten carbide surgical instruments, automatic washing equipment and autoclaves.
DIRECTIONS Wear appropriate personal protective equipment based on safe work practices.
MANUAL DESCALING Dilute 1 part Cool Soak with 7 parts warm water. Soak thoroughly cleaned and opened instruments in prepared solution for 5-15 minutes. Scrub instruments under water with the Cool Soak solution and rinse thoroughly with water. Thoroughly clean instruments again once Cool Soak has been used and then lubricate and sterilize as normal. Change solution daily or more often as needed.
ULTRASONIC DESCALING Dilute 1 part Cool Soak with 7 parts water. Descaling
AUTOMATIC WASHING EQUIPMENT Dilute 1 fl. oz. (30 mL) to 3 fl. oz. (88 mL) Cool Soak per gallon (3.8 L) of water and follow manufacturer’s guidelines for descaling.
DESCALING AUTOCLAVES Dilute 1 part Cool Soak with 1 part water. Apply solution to cool chamber walls and soak for 10-15 minutes. Wipe off (scrubbing may be necessary for heavier deposits) and rinse thoroughly with warm water.
